1. Tsayin wurin shigarwa bai kamata ya wuce mita 2000 ba
2. Zafin yanayi: -5°C~+40°C, matsakaicin ƙima a cikin awanni 24 bai wuce +35°C ba
3. Yanayin Yanayi: Danshin da ke tsakanin yanayin zafi da sanyi bai wuce kashi 50% ba idan zafin jiki mafi girma shine +40°C, ana barin shi ya yi zafi sosai a yanayin zafi mai ƙarancin zafi, misali, yana kaiwa kashi 90% idan zafin ya kai 20°C, kuma ya kamata a yi ma'auni na musamman idan akwai danshi a kan kayayyakin da ke tsakanin yanayin zafi da sanyi.
4. Gurɓataccen yanayi: 3
5. Yanayin Shigarwa: Ana sanya shi a wuraren da ba tare da girgizar tasiri ba kuma ba tare da ruwan sama da dusar ƙanƙara ba; Tashar sama tana haɗuwa da gefen samar da wutar lantarki, tashar ƙasa tana haɗuwa da gefen kaya, kuma yanayin da ke tsakanin gefen shigarwa da gefen tsaye bai wuce 5° ba.
6. Nau'in Shigarwa:Ⅲ
7. Filin maganadisu na waje na wurin shigarwa da ke kusa bai kamata ya wuce sau 5 na filin maganadisu na Duniya a kowace hanya ba.
Sigar asali ta samar da wutar lantarki biyu ATS don ganin tebur 1
| Sigar Aikin Samfura (Tebur 1) | ||
| Yana tabbatar da daidaito | IEC60947-6-1 | |
| ATS Grade CB aji | CB | |
| Nau'in amfani | AC-33iB | |
| Ƙwaƙwalwar aiki mai ƙima Ue | AC230V-400V | |
| Mitar aiki mai ƙima | 50Hz/60Hz | |
| An ƙima ƙarfin aiki le(A) | 6,10,16,20,25,32,40,50,63 | |
| Ƙarfin wutar lantarki mai canzawa | AC230V | |
| Ƙwaƙwalwar ƙarfin lantarki mai ƙima UI | AC690V | |
| Lokacin canja wurin aiki | ≤3s (ba za a iya daidaitawa ba) | |
| Rayuwa | Rayuwar lantarki | Sau 1500 |
| Rayuwar injina | Sau 6000 | |
| Ƙarfin haɗin gajere mai ƙima Icm | 7.5kA | |
| Ƙarfin karyawa na gajeren lokaci Icn | 5kA ku | |
Sigar asali don nau'in gargajiya da na'urar samar da wutar lantarki mai wayo biyu ATS don ganin tebur na 2
| Samfurin Samfuri (Tebur 2) | Nau'in Al'ada | Nau'in Mai Hankali |
| Yanayin shigarwa | Nau'in da aka haɗa | Nau'in da aka haɗa |
| Yanayin aiki | Atomatik da kuma manual | Atomatik da kuma manual |
| Aikin saka idanu | Gano lokaci mai karyewa | A ƙarƙashin ƙarfin lantarki, asarar lokaci da gano lokaci na fashewar wutar lantarki na al'ada |
| Yanayin canja wuri | Canja wurin atomatik da dawo da atomatik | Canja wurin atomatik amma baya dawo da atomatik |
| Kula da haɗin kai na kariyar wuta | Ba | DC12-24V shigarwar hutu biyu (aikin yanke wuta ta atomatik) |
| Aikin nuni | Hasken LED | Hasken LED |
Girman waje da shigarwa sun tabbatar da tebur na 3 da taswira 1
| Girma (Tebur 3) | Girman Waje | Girman Shigarwa | ||||
| Samfuri | L | M | H | L1 | W1 | Φd |
| Sanduna huɗu | 222 | 135 | 116 | 202 | 123 | 5 |
| Sanduna uku | 185 | 165 | ||||
Wayar mai amfani
Wayar da ke amfani da wutar lantarki mai amfani da wutar lantarki sau biyu ita ce waya mai rufin PVC guda ɗaya ko kuma daidai da jan ƙarfe.sanda, sashin giciye bisa ga tebur na 4.
| Tebur na 4 | |||||||
| An ƙima darajar ln(A) na yanzu | 6 | 10 | 16 20 | 25 | 32 | 40 50 | 63 |
| Sashen giciye na waya ko kebul mm² | 1.0 | 1.5 | 2.5 | 4.0 | 6.0 | 10.0 | 16.0 |
Taswirar wayoyi na samar da wutar lantarki biyu ATS
Zane na wayoyi na sandunan ATS guda huɗu don ganin hoto na 2.
Tsarin wayoyi don tashar fitarwa ta ATS
1. Tsarin wayoyi don tashar fitarwa ta nau'in gargajiya don ganin hoto na 4
2. Tsarin wayoyi don tashar fitarwa ta nau'in mai hankali don ganin hoto na 5
