Hoton da aka Fito da shi na RDM1E Series (MCCB)

Jerin RDM1E (MCCB)

Na'urar karya akwatin lantarki ta jerin RDM1E wacce aka ƙera ta hanyar amfani da fasahar zamani ta duniya. Tare da ƙarfin lantarki mai ƙarfi na 800V, ana amfani da ita ga da'irori na AC 50Hz, ƙarfin lantarki mai aiki na 400V, ƙarfin lantarki mai ƙarfi har zuwa 1250A.

Yana aiki a matsayin na'urar sauyawa da bangaren kunna mota, wanda ke haɗa ayyuka da yawa na kariya ciki har da iyakokin lokaci mai tsawo na ɗaukar kaya, iyakokin lokaci mai jinkiri na gajeren da'ira, iyakokin lokaci mai iyaka na gajeren da'ira, kariyar lokaci mai sauri na gajeren da'ira, da kariyar ƙasa da ƙarfin lantarki. Waɗannan ayyuka suna kare da'irori da kayan aikin wutar lantarki daga lalacewa yadda ya kamata.

Yana da halaye na ƙaramin girma, ƙarfin karyewa mai yawa, ɗan gajeren nesa na arcing, da kuma hana girgiza.
Ba za a iya juya waya ba, kawai ana iya haɗa waya 1, 3, 5 zuwa layin wutar lantarki, 2, 4, 6 zuwa layin kaya.

Aika mana imel Sauke shi azaman PDF

Cikakken Bayani game da Samfurin

Yanayin Aiki na Al'ada da Muhalli na Shigarwa

1. Tsawon wurin shigarwa bai wuce mita 2000 ba

2. Zafin jiki: -5°C~+40°C, kuma matsakaicin zafin jiki a cikin awanni 24 bai wuce +35°C ba

3. Danshin da ke tsakanin mutane: ba zai wuce kashi 50% ba, idan zafin jiki ya kai +40°C. Samfurin zai iya barin zafi ya fi yawa a ƙarƙashin ƙaramin zafin jiki, misali, lokacin da danshi ya kai kashi 90% idan yana +20°C

4. Ajin gurɓatawa: aji na 3

5. Nau'in shigarwa na babban da'irar: aji Ⅲ, nau'in shigarwa na da'irar taimako da da'irar sarrafawa: aji Ⅱ

6. Amfani da rukuni: A ko B

Babban Halayen Aiki

Mai sarrafa hankali shine babban ɓangaren MCCB, ana amfani da shi a cikin kariyar rarraba wutar lantarki ko wutar lantarki don cimma haɗakar ayyukan aunawa, kariya, sarrafawa da sadarwa, ta yadda kayan aikin da'ira da wutar lantarki za a kare su daga wuce gona da iri, da'ira ta gajere, ƙasa da sauran haɗarin lahani. Ta amfani da mai sarrafa sarrafa MCU mai hankali, mai karko kuma abin dogaro, zai iya samar da wutar lantarki, matuƙar an haɗa mataki ɗaya, lokacin da wutar lantarki ba ta ƙasa da 20% na ƙimar da aka ƙima ba, zai iya tabbatar da aikin kariya na yau da kullun. Haɗin kai na zaɓi tare da kariyar matakai uku:

1. Mai karya da'ira na rukuni na B yana da haɗin kai na zaɓi idan an haɗa shi da wasu na'urorin kariya na gajeren da'ira a cikin da'ira ɗaya a ƙarƙashin yanayin gajeren da'ira;

2. Daidaita sigogin aikin kariya kamar jinkirin wuce gona da iri, jinkirin juyawa, jinkirin gajeren da'ira (jinkirin juyawa, jinkirin da aka ƙayyade), jinkirin gajeren da'ira nan take, da sauransu;

3. Yana da saitunan sigogi guda uku na yanayin aiki da lokacin aiki, kuma ana iya daidaita shi a cikin gears 4-10: mai amfani zai iya saitawa da daidaita mai sarrafawa bisa ga buƙatun yanayin aiki, kuma ana iya kashe aikin da ya dace bisa ga buƙatun mai amfani:

①Aikin girgiza kai tsaye na babban wutar lantarki: lokacin da mai karya da'ira ya rufe kuma yana aiki, idan da'ira ta yi gajere kuma babban wutar lantarki (≥20Inm) idan aka ci karo da su, ana iya karkatar da hanyar karkatar da maganadisu ta hanyar na'urar karya da'ira kai tsaye, kuma kariyar biyu ta fi aminci da aminci.

②Aikin gwajin karkatarwa: shigar da wutar lantarki ta DC12V don gwada halayen aiki na mai karya da'ira;

③Aikin gano cutar kai: karewa da gano yanayin aiki da yanayin aiki na mai sarrafa hankali da kansa;

④Alamar gargaɗi kafin lokaci da kuma aikin nuna yawan aiki: lokacin da ƙarfin kaya ya kai ko ya wuce ƙimar da aka saita, ana fitar da tushen hasken ginshiƙin haske;

⑤Fasaha tazara ta iska guda biyu ta na'urar canza kwararar maganadisu: aiki mafi inganci da kwanciyar hankali, kawar da matsala, ingantaccen tuntuɓewa, da ƙarancin ƙarfi;

⑥Daidaiton kariya mai girma: kariyar wuce gona da iri, da'ira ta gajere, kariyar jinkiri ta gajere, daidaiton aiki na±10%;

⑦daidaiton ƙimar kariya ta gajeren da'ira±Kashi 15% ya dogara da wutar lantarki;

⑧Shigarwa tana da sauƙin canzawa: girma da girman shigarwa iri ɗaya ne da jerin RDM1 MCCB tare da ƙayyadaddun bayanai da girma iri ɗaya.

Zaɓaɓɓun ayyuka

1.Akwai aikin sa ido da kariya na zafin jiki: lokacin da zafin jiki na yanayi ya wuce matakin da aka saita (saitin tsoho shine 85℃), mai sarrafawa ba zai fitar da siginar photoelectric na ƙararrawa ba ko kuma ya kashe mai karya da'ira;

2. Aikin fitarwa na siginar mara aiki guda biyu: don sigina (ko ƙararrawa), ƙarfin AC230V5A;

3. Yana da aikin ƙwaƙwalwar zafi mai yawa: aikin ƙwaƙwalwar zafi mai yawa, aikin ƙwaƙwalwar zafi mai gajeren lokaci (jinkirin gajere);

4. Tare da aikin motsa jiki na kashe gobara: ƙararrawa mai yawa ba ta yi karo ba (an samar da lambobi biyu marasa aiki) kuma an samar da aikin tayar da hankali ko aikin sadarwa;

5. Tare da ayyukan sadarwa: daidaitattun RS232, RS485, da ka'idojin Modbus fieldbus

Kariya

1. Daidaitawar ammeter lR mai ɗaukar lokaci mai tsawo, dangane da yanayin wutar lantarki daban-daban na mai karya da'ira, ana iya daidaita shi daga matakai 4 zuwa 10;

2. Daidaita TR na tsawon lokaci, wanda za'a iya daidaitawa a matakai 4;

3. Daidaita aikin jinkirin aiki na ɗan gajeren lokaci na Isd, wanda za'a iya daidaitawa a matakai 10.

4. Daidaita tsd na ɗan gajeren lokaci, wanda za'a iya daidaitawa a matakai 4;

5. Daidaita ammeter li na aiki na ɗan gajeren lokaci, wanda za'a iya daidaitawa a matakai 8, 9, ko 10

6. Daidaitawar lp na halin yanzu kafin ƙararrawa, wanda za'a iya daidaitawa a matakai 7.

Sauran ayyuka

1. Tashar gwaji don duba ƙimar saitin yanzu na sakin lantarki (ko gwajin fitarwa).

2. Alamar gudu;

3. Alamar faɗakarwa kafin faɗakarwa;

4. Maɓallin sakewa

Babban Bayani na Fasaha

Samfuri		RDM1E-125		RDM1E-250		RDM1E-400		RDM1E-630		RDM1E-800
Inn(A) na yanzu		125		250		400		630		800
Ajin ƙarfin aiki mai ƙarfi		M	H	M	H	M	H	M	H	M	H
An ƙima halin yanzu A(A)		32,63,100		250		400		630		630,800
Sandan ƙafa		3, 4		3, 4		3, 4		3		3, 4
Ƙwaƙwalwar ƙarfin lantarki Ue(V)		AC400
Ƙwaƙwalwar lantarki mai rufi mai ƙima Ui(V)		800
Ƙarfin wutar lantarki mai jure wa bugun jini (V)		8000
Ƙarfin karyawa mai iyaka Icu(KA)		35	50	35	50	50	70	50	70	50	70
Ƙimar ƙarfin karyawa na aiki mai ƙima ICS (KA)		25	35	25	35	35	50	35	50	35	50
An ƙididdige juriya na ɗan gajeren lokaci na yanzu Icw 1S (KA)		5		5		5		10		10
Amfani da rukuni		B		B		B		B		B
Nisa tsakanin baka (mm)		≤50		≤50		≤100		≤100		≤100
Aikin aiki	Kunnawa (Lokaci)	1500		1000		1000		1000		500
	A kashe wuta (Lokaci)	8500		7000		4000		4000		3000
Wayoyin faranti na gaba		○		○		○		○		○
Wayoyin wayar baya		○		○		○		○		○
Wayoyin toshe-a		○		○		○		○		○
Wayoyin aljihun tebur		-		-		○		○		○
A ƙarƙashin sakin ƙarfin lantarki		○		○		○		○		○
Rufe sakin		○		○		○		○		○
Taimakon taimako		○		○		○		○		○
Lambar tuntuɓar ƙararrawa		○		○		○		○		○
Tsarin aikin injin		○		○		○		○		○
Injin aiki da hannu		○		○		○		○		○
Na'urar gwajin hannu		○		○		○		○		○
Tsarin sarrafa hankali		○		○		○		○		○
Tsarin wutar lantarki na gwaji		○		○		○		○		○
Module ɗin nuni na LCD		○		○		○		○		○

Bayyanar da Shigarwa Girma

Girman bayyanar kamar Hoto na 2, Hoto na 3, Hoto na 4, Hoto na 5, Hoto na 6 da tebur na 1

① Girman bayyanar wayoyi na gaban allo kamar Hoto na 2 (XX,YY shine tsakiyar mai karya da'ira na 3P

② Girman bayyanar wayoyi na baya kamar Hoto na 3, Hoto na 4

③Fitar da gaban allon waya girman kamannin wayoyi kamar yadda Hoto na 5 ya nuna

④ Girman kamannin wayoyi na baya kamar yadda Hoto na 6 ya nuna

Samfuri (Tebur 1)	Wayoyin gaban allo
Samfuri (Tebur 1)	W	W1	L	L1	L2	L3	H	H1	H2	H3	H4	E	F	G	W2
RDM1E-125	92	60	150	100	132	88.5	93	112	29	29	12	50	22	18	122
RDM1E-250	107	70	165	132	144	102	90	110	24	24	5	62	22	22	142
RDM1E-400	150	96	257	220	224	175	107	147	38	38.5	5	89	65	33	198
RDM1E-630	150	96	257	220	224	175	107	147	40	41.5	5	89	65	33	-
RDM1E-800	210	140	280	240	243	205	116	155	42	45	4	81.5	66.5	44	280

Samfuri (Tebur 1)	Wayoyin bayan allon							Wayoyin toshe-a
Samfuri (Tebur 1)	L4	H5	H6	H7	M1	d	t	L6	H8	H9	H10	H11	M1	M2	L7	L8
RDM1E-125	164	53	93	35	M8	—	—	168	50	64	76	18	M8	M6	220	250
RDM1E-250	173	55	100	35	M10	8.5	—	186	50	72	87	18	M8	M6	252	276
RDM1E-400	267	46	83	37	M12	12	8.5	280	60	84	107	21	M10	M8	357	387
RDM1E-630	295	46	83	—	M12	12	8.5	280	60	84	107	21	M10	M8	357	387
RDM1E-800	295	47	87	—	M16	16	16	305	61	97	148	16	M12	M8	—	—

Girman buɗe ramin shigarwa na allon shigarwa

①Duba Hoto na 7 don girman buɗe ramuka na allon shigarwa na wayoyi a gaban allo (XX, YY cibiyoyin karya da'ira ne masu sanduna uku)

Samfuri		RDM1E-125		RDM1E-250		RDM1E-400/630		RDM1E-800
Adadin sandar		3	4	3	4	3	4	3	4
Girman buɗe ramin shigarwa na allon shigarwa (mm)	A	30		35	70	44		70
	B	129		126		194		243
	d	4.5		4.5		7		7

②Duba Hoto na 8 don girman buɗe ramuka na allon shigarwa na wayoyi na baya (XX, YY cibiyoyin karya da'ira ne masu sanduna uku)

Samfuri		RDM1E-125		RDM1E-250		RDM1E-400/630		RDM1E-800
Adadin sandar		3	4	3	4	3	4	3	4
Girman buɗe ramin allon shigarwa (mm)	A	60	—	70	—	96	—	140	—
	A1	—	90	—	105	—	144	—	210
	B	72	—	87	—	124	—	178	—
	B1	—	102	—	122	—	172	—	248
	C	90		93		164		158
	D	132		144		224		243
	φ1	22		24		32		48
	φ2	5.5		5.5		6.5		7

③Duba Hotoure 9 don toshe gaban wayoyi na farantin hawa farantin girma (XX, YY cibiyoyin karya da'ira guda 3 ne)

Samfuri		RDM1E-125	RDM1E-250	RDM1E-400/630
Adadin sandar		3	3	3
Girman buɗe ramin shigarwa na allon shigarwa (mm)	A	94	110	152
	B	60	70	60
	C	56	54	129
	D	41	66	65
	E	90	91	166
	d	6.5	6.5	8.5

④Duba Hoto na 10 don girman buɗe ramuka na allon shigarwa na wayoyi na baya (XX, YY cibiyoyin karya da'ira uku ne)

Samfuri		RDM1E-125		RDM1E-250		RDM1E-400/630		RDM1E-800
Adadin sandar		3	4	3	4	3	4	3	4
Girman buɗe ramin shigarwa na allon shigarwa (mm)	A	94	—	107	—	149	—	210	—
	A1	—	129	—	145	—	200	—	290
	B	60	—	70	—	60	—	90	—
	B1	—	90	—	105	—	108	—	162
	C	56		54		129		146
	D	38		45.5		54.5		72
	E	92		95		171		181
	D	6.5		6.5		8.2		11

Ayyukan sadarwa na masu fashewa na da'ira

RDM1E intelMai karya da'ira mai ligent tare da tsarin aiki na lantarki yana da alaƙa da kwamfutar da ke sama (kamar kwamfuta), kuma yana iya aiwatar da aikin "na'urar nesa huɗu" ta hanyar hanyar sadarwa. RS485 interface, Modbus-RTU protocol, communication baud rate 9600K. Bugu da ƙari, tare da ƙarin mai sarrafa na'urar karya da'ira ta RDM1E (zaɓi), ana iya karantawa da gyara sigogin na'urar karya da'ira kai tsaye a wurin.

Hanyoyin sadarwa da kayayyaki na waje don masu fashewa da'ira masu hankali

Masu katsewar da'irar RDM1E masu wayo waɗanda aka ƙera suna sanye da hanyar sadarwa da kuma tsarin sadarwa na MODBUS. Ba a amfani da RDM1E don sadarwa ta hanyar sadarwa ba, amma idan aka yi amfani da su daban-daban, mai shirye-shiryen hannu zai iya yin ayyuka kamar saita halayen kariya akan masu katsewar da'ira. f Ana amfani da RDM1E don sadarwa ta hanyar sadarwa, ana iya haɗa su kai tsaye zuwa bas ɗin filin da ya dace;

Cibiyar sadarwa ta hanyar na'urar kera akwati mai wayo wacce aka ƙera ta hanyar fasahar RDM1E

Ana iya haɗa hanyar sadarwa ta hanyar duba tsarin da ke ƙasa. Ana iya zaɓar nau'ikan yarjejeniyoyin yarjejeniya daban-daban don daban-daban
prbtocols don canza MOBBUS zuwa PROFIBU S-DP da sauran protbcols.

Sashen ƙararrawa mara fitarwa

Idan aka yi amfani da samfurin a cikin da'irar kashe gobara, ana buƙatar a firgita mai sarrafawa don aikin da ba ya sakin jiki, a wannan lokacin, ya zama dole a haɗa na'urar ƙararrawa mara sakin jiki mai yawa don kare ci gaba da samar da wutar lantarki da kuma biyan buƙatun GB50054 Mataki na 6.3.6.

Na'urar na iya sa ido kan siyar da na'urar fashewa ta hanyar aikin sadarwa, sadarwa daga nesa don buɗe babban da'irar, siginar ƙararrawa (samar da lambobin sadarwa biyu masu aiki) lokacin da aka cika da yawa a cikin da'irar, da sauransu. Ana iya amfani da shi don sarrafawa ta tsakiya da kuma kula da sashen wutar lantarki da masu amfani da wutar lantarki.

Sadarwa Mai Wayar da Kai Mai Hankali Mai Sauƙi Shunti Module

Ana iya amfani da shi don sa ido kan sigogin aiki na na'urar warware wutar lantarki mai hankali don maye gurbin aikin nunin mita, sadarwa ta atomatik don buɗe babban da'irar, kuma a lokaci guda yana ba da wutar lantarki mai aiki ga na'urar warware wutar lantarki mai hankali. Hasken kore koyaushe yana kunne lokacin da aka kunna ƙarfin aiki na na'urar, kuma hasken kore yana walƙiya yayin sadarwa ta yau da kullun.

Mai Hankali Mai Kariya na Da'ira Mai Kariya

Ana iya amfani da shi don yin aiki tare da masu fashewa na da'ira masu hankali, sadarwa ta atomatik daga nesa don buɗe babban da'irar, kuma yana iya samar da aikin aikiƙarfin wutar lantarki na AC230V, AC400V, DC24V.

Tsarin sadarwa mai nisa huɗu

Mai sarrafawa yana da aikin sadarwa, yana buƙatar yin aiki tare da kayan haɗin da suka dace don cimma aikin (girman kauri na module ɗin sadarwa na 25mm). Sigogi na halayen sadarwa sune kamar haka;

Interface: kayan haɗin sadarwa na waje na mai sarrafawa, kayan haɗin haɗin shine daidaitaccen hanyar sadarwa ta RS485;

Matsakaicin Baud (bps): 9600 ta tsohuwa, ana iya saita na'urar sarrafawa ta nesa a cikin kewayon 2400,4800, 9600, 19200, 38400;

Tsarin Sadarwa: Bit ɗin Bayanai: 8; Checksum: ko da; Stop Bit: 1;

Yarjejeniyar Sadarwa: Modbus RTU, Yanayin Bawa;

Adireshin na'ura: 10 (tsoho); Tsarin sarrafawa na nesa 1~255.

A'a.	Suna	Aikin Haɗin 10p	Ƙarfin wutar lantarki mai ƙima (kewayon)	Ƙarfin siginar sarrafawa mai ƙima (kewayon)
1	Na'urar Nesa Huɗu Kayan haɗi	Na'urar Nesa Huɗu Sadarwa+ Maimaita Maɓallan+ Alamar Aiki	DC24V(85%-110%)	Siginar matsayi DC24V(85%-110%) Siginar aiki ta lantarki DC24V
1	Na'urar Nesa Huɗu Kayan haɗi	Na'urar Nesa Huɗu Sadarwa+ Maimaita Maɓallan+ Alamar Aiki	AC230V(85%-110%	Siginar matsayi AC230V (85%-110%) Siginar aiki ta lantarki AC230V
Bayani	Sake saita maɓallin aiki: danna ka riƙe don mintuna 5; sigogi kamar ƙimar baud na sadarwa da adireshin sadarwa an dawo da su zuwa ƙimar masana'anta.

Na'urorin haɗi na ciki don Masu Katsewar Da'ira

Rufe sakin

Ƙarfin wutar lantarki mai ƙima volMatsakaicin sakin shunt shine AC50Hz, 230V, 400v; DC24v, ana iya karkatar da na'urar yanke wutar lantarki ta hanyar da ta dace da ƙasa da kashi 85%na ƙarfin wutar lantarki mai sarrafawa mai ƙima, an nuna zane-zanen wayoyi na mai amfani a cikin hoton da ke ƙasa.

Lura:K: Micro-switch ɗin da ke cikin sakin shunt ɗin a jere tare da coil ɗin lamba ce da aka saba rufewa, wacce ke buɗewa da kanta lokacin da aka toshe na'urar fashewa kuma tana rufewa lokacin da aka rufe na'urar fashewa.

Sakin ƙarfin lantarki mara ƙarfi

Lokacin da ƙarfin lantarki ya faɗis (har ma da slmujiyay) zuwa ga ƙarfin lantarki mai ƙima a cikin kewayon 70%-35%, ya kamata a yi amfani da sakin ƙarancin wutar lantarki; idan ya yi ƙasa da 35% na ƙarfin lantarki mai ƙimaLokacin da aka saki, sakin ƙarancin wutar lantarki ya kamata ya iya hana mai karya da'ira rufewa; lokacin da ƙarfin wutar lantarki ya yi daidai da ko ya fi 85%, sakin ƙarancin wutar lantarki ya kamata ya tabbatar da cewa ana iya rufe mai karya da'ira cikin aminci. Dangane da buƙatun mai amfani, ana iya fitar da kayan haɗin mai karya da'ira kai tsaye ko shigar da toshewar tashar, wayar mai amfani duba hoton da ke ƙasa.

Hoton da ke gefen hagu shine Zane-zanen Wayoyin da ke ƙarƙashin ƙarfin lantarki na waje (akwatin da aka yi da kaifi yana nuna zane-zanen wayoyi na cikin da'irar karya)

GARGAƊI:Dole ne a kunna wutar lantarki kafin a sake kunna wutar lantarki ta hanyar rufe ta, in ba haka ba wutar lantarki za ta lalace!

Taimakon taimako

An raba hanyoyin sadarwa na masu haɗa na'urar breaker zuwa ƙungiyoyi biyu, kowannensu ba zai iya raba wutar lantarki ba. Ana nuna wayoyi masu amfani a cikin
zane a ƙasa.

Lokacin da mai warware da'ira ya kasance a wurin "buɗe"
	Na'urar karya da'ira ta Shell 400A da sama da ita
	Tsarin shell na yanzu 400A da ƙasa da mai karya da'ira

Lambar tuntuɓar ƙararrawa

Lambobin ƙararrawa ba sa aiki yayin rufewa da karya na'urar yanke wutar lantarki ta yau da kullun, kuma lambobin sadarwa suna canza matsayinsu na asali ne kawai bayan
saki kyauta ko kuma ɓatar da kurakurai

Zane
Lokacin da mai karya da'ira ya kasance a Matsayin "rufe" na "buɗe"

Kayan haɗi na waje don Masu Katsewar Da'ira

Injin aiki na injin

An nuna zane-zanen wayoyi na injinan aiki na injin a ƙasa (zanen wayoyi na ciki na injinan aiki na injinan aiki a cikinakwatin da aka yi wa dige-dige)

An nuna wutar lantarki, wutar lantarki da rayuwar tsarin aikin lantarki a cikin teburin da ke ƙasa.

Mai katsewar da'ira don amfani da daidai	Wutar lantarki mai aiki (A)	Ƙarfin mota (W)	Tsawon rayuwa (lokutan)
RDM1E-125	≤0.5	14	10000
RDM1E-250	≤0.5	14	8000
RDM1E-400/630	≤2	35	5000
RDM1E-800	≤2	35	5000

An nuna tsayin injin aiki mai injin a cikin jadawalin da ke ƙasa.

● Bayanin ƙarfin lantarki: AC 50Hz 110V, 230V DC110V, 220V shigarwar wutar lantarki

● Ya dace da bayanin: Maɓallan aiki na SB1, SB2 (wanda mai amfani ya bayar)
Toshewar tashar X
P1, P2 shigarwar wutar lantarki ce ta waje

● LURA: Bayan na'urar yanke wutar lantarki ta lalace, dole ne injin aiki na injin ya fara haɗa da'irarna'urar fashewa kafin ta iya rufe na'urar fashewa ta kewaye.

Tsarin aiki na juyawa da hannu (wanda aka saba da shi ga masu karya da'ira masu sanduna uku da sanduna huɗu)

An sadaukar da tsarin ne ga masu karya da'ira na jerin RDM1E, ta hanyar juyawar maƙallin don cimma rufewar mai karya da'ira. Wannan kabad ɗin buɗewa da sake buɗewa da aljihun tebur, kabad ɗin rarrabawa, akwatunan wuta, da sauransu a cikin buƙatun aikin panel, da kuma tabbatar da cewa mai karya da'ira yana cikin ƙofar kabad ɗin mai karya da'ira da aka rufe (watau, an kulle shi da ƙofar). Girman sa na waje an nuna shi a cikin adadi da tebur mai zuwa.

Mai katsewar da'ira don amfani da daidai	A(mm)	B(mm)	H(mm)
RDM1E-125	104	30	49
RDM1E-250	143	35	55
RDM1E-400/630	194	138	74
RDM1E-800	243	198	66

Tsarin aiki na juyawa da hannu

Ana iya sanya na'urar sarrafa hannu da hannu nau'ikan madauri guda biyu: ɗaya don madauri murabba'i na nau'in "F"; ɗayan kuma don madauri mai zagaye na "A'type", girman buɗe ƙofarsa duba hoton da ke ƙasa. Juya halayen madauri na tsarin aiki da hannu:

● Ba za a iya buɗe ƙofar kabad ba lokacin da na'urar yanke wutar lantarki ke cikin yanayin rufewa.

● Idan makullin aiki ko tsarin aiki da hannu ya lalace a yanayin rufewa, ana iya buɗe ƙofar kabad ta hanyar na'urar kulle-kulle ta gaggawa da ke kan makullin aiki.

● Daidai da takamaiman bayanai daban-daban na tsarin aiki da hannu, makullin aiki da hannu mai dacewa, buɗewar farantin ƙofa shinedaidaito.

Nau'in mai warware da'ira mai dacewa	H(mm)
RDM1E-125	94
RDM1E-250	90
RDM1E-400/630	145
RDM1E-800	147

Girman buɗe ƙofar ƙofar akwatin "F" mai siffar murabba'i (nisan tsakiyar buɗewa daga wurin hinge bai gaza 100mm ba)

Girman L:RDM1E-125 shine 65, RDM1E-250 shine 95, RDM1E-400 shine 125

Girman buɗe ƙofar akwatin "A" mai zagaye (tsakiyar buɗewa daga nisan hinges ba ta ƙasa da 100mm ba)

Lura:

● Tsawon shaft mai murabba'i D = 150mm (tsoho), tsawon bai wuce 150mm ba, a cikin matakan 50mm, mafi tsayi zai iya samar da 500mm, don yin oda.

● Idan injin aiki da hannu yana da madannin nau'in "F", ƙara "F", idan yana da madannin nau'in "A", ƙara "A". Kamar CZE-100-F.lf ba a ƙayyade shi ba, tsoho shine nau'in A.

● Dole ne a yi odar hanyoyin aiki da hannu daga masana'antarmu a matsayin cikakken saiti don tabbatar da ingancin samfurin. Idan masu amfani suka saya da kansu, masana'antarmu ba za ta ɗauki alhakin duk wani mummunan sakamako da ya faru bayan shigarwa da haɗawa ba.

125 amp mccb