RDM1 Series CE CB ISO Molded Case Circuit 400 ko 690V Breaker (MCCB)

RDM1 jerin samfurin yana da ƙaramin ƙara, babban ƙarfin karyewa, gajeriyar baka, fa'idodin anti vibration, wanda shine mafi kyawun samfurin don amfanin ƙasa da ruwa.Breaker rated rufi irin ƙarfin lantarki 800V (RDM1-63 rufi irin ƙarfin lantarki ne 500V), ana amfani da rarraba cibiyar sadarwa na AC 50Hz/AC60Hz, rated aiki ƙarfin lantarki har zuwa 690V, rated halin yanzu har zuwa 1250A don rarraba ikon da kuma kare kewaye da ikon tushen daga. overload, short-circuit da under-voltage lalacewa, kuma za a iya amfani da shi don canja wurin da'ira, motor_x005f fara ba da yawa da kuma overloading, short-kewaye da karkashin-voltage kariya.Ana iya shigar da samfurin a tsaye da a kwance.
Ana amfani da wannan samarwa ga insulation, alamar:

Yanayin aiki na yau da kullun da yanayin shigarwa

3.1 Zazzabi: bai fi +40°C ba, kuma ba ƙasa da -5°C, kuma matsakaicin zafin jiki bai wuce +35°C ba.
3.2 Wurin shigarwa bai wuce 2000m ba.
3.3 Yanayin zafi: bai wuce 50% ba, lokacin da zazzabi ya kasance +40 ° C.Samfurin na iya jure zafi mafi girma a ƙarƙashin ƙananan zafin jiki, misali, lokacin da zazzabi a +20 ° C, samfurin zai iya jure zafi 90%.Ya kamata a kula da ma'auni na musamman wanda ya faru saboda canjin yanayin zafi
3.4 Matsayi na gurɓatawa: 3 Class
3.5 Matsakaicin kusurwa mai karkata zuwa shigarwa: 22.5°
3.6 na'ura mai ba da hanya tsakanin hanyoyin sadarwa da nau'in shigarwa na sarrafawa: II Class;Nau'in shigarwa na babban mai karkatar da kewayawa: Class III;
Yana iya jure jijjiga na yau da kullun kuma yana aiki a tsaye ƙarƙashin yanayin ruwa.

Babban ma'aunin fasaha

4.1 Babban ma'aunin fasaha duba Table 3

4.2 Matsakaicin fitarwa na yanzu ya ƙunshi fitarwar relay na thermal tare da yanayin juzu'in lokaci da sakin nan take (electromagnetic).

Na'ura mai watsewar kewayawa

5.1 Na'urorin haɗi na ciki
5.1.1 Shunt saki
Jadawalin haɗin kai, duba Hoto 1 da Hoto 2.
Ƙimar wutar lantarki na wutar lantarki mai sarrafawa: AC 50/60Hz, 230V, 400V;DC24V, mai watsewar kewayawa na iya aiki da dogaro ƙarƙashin 85% zuwa 110% na ƙimar ƙarfin wutar lantarki mai sarrafawa.

5.12 Ƙarƙashin ƙarfin lantarki
Lokacin da ƙarfin lantarki ya kasance ƙasa da 35% na ƙimar ƙarfin ikon sarrafawa, wannan sakin na iya hana mai watsewar kewayawa daga rufewa.Zane na haɗin kai, duba hoto na 3.
Lokacin da ƙarfin lantarki ya ragu zuwa kewayon 70% zuwa 35% na ƙimar ƙarfin ikon sarrafawa, sakin da ke ƙarƙashin ƙarfin lantarki zai yi rauni.
Lokacin da ƙarfin lantarki yana cikin kewayon 85% zuwa 110% na ƙimar ƙarfin ikon sarrafa wutar lantarki, wannan sakin na iya tabbatar da dosing ɗin da'ira cikin dogaro.
Sanarwa: Mai watsewar da'ira tare da sakin wutar lantarki na iya yin tururuwa da rufewa, kawai ya ba da na'urar kashe wutar lantarki.

5.13 Abokin hulɗa
Mai watsewa yana da lamba saiti biyu, kowane saiti baya buɗewa akan wutar lantarki, ƙarin bayanan tuntuɓar, duba Table 5.

5.14 Ƙararrawa
Ma'aunin ƙarfin ƙarfin aiki mai ƙima, duba Table 5.

5.15 Na'urorin haɗi na musamman na mitar da aka riga aka biya
Shunt saki na Pre-paid Mita rated aiki ƙarfin lantarki ne AC230V 50Hz, Yi aiki a cikin kewayon 65% zuwa 110% Ue, lokacin da Ctrl batu a bude, da'irar breaker za a karya bayan 0.5s zuwa 2s deley.Duba zane:

5.16 Ƙarfin wutar lantarki
Ya kamata na'urar da ke jujjuyawar wutar lantarki ta wuce-wuri ta kasance tana tunkuɗawa a ƙarƙashin waɗannan sharuɗɗa:
a) Lokacin da rated aiki ƙarfin lantarki (lokacin lantarki) Ue kasa da 262V
b) Lokacin da tsaka tsaki na matakai uku da wayoyi hudu ke karye
c) Lokacin da layin tsaka tsaki ya ɓace layin lokaci,

5.2 na'ura mai watsewa na waje
5.21 Tsarin tsarin aikin lantarki duba Table 6

5.22 Ya kamata a shigar da tsarin aiki da hannu bayan hako rami bisa ga zane.
Rotary rike "KASHE" da aka nuna zuwa matsayi a kwance, kiyaye matsayi, da kuma kokarin yin aiki da kayan aiki, juyawa ya kamata ya zama mai sauƙi, kuma mai fashewa ya kamata a bude lokacin da rike a matsayi a kwance;kuma ya kamata a rufe mai karyawa lokacin da rike a tsaye.

Gabaɗaya da Girman Hawa (mm)

5.23 Girman shigarwa na tsaka-tsakin injina na masu watsewar da'ira biyu, duba Table 6 Hoto 6 da Tebura 8.

6.2 Haɗin baya gabaɗaya, duba Hoto 8 da Tebu 10.

6.3 Shigar da haɗin baya buɗaɗɗen girman ramin, duba Table 9

6.4 RDM1 Saka nau'in gabaɗaya da girman buɗaɗɗen ramin shigarwa, duba hoto na 10, siffa 11 da Tebura 11

6.5 RDM1 tsayin da'ira bayan shigar da injin aiki na motop, duba Table 12.

RDM1 jerin samfurin yana da ƙaramin ƙara, babban ƙarfin karyewa, gajeriyar baka, fa'idodin anti vibration, wanda shine mafi kyawun samfurin don amfanin ƙasa da ruwa.Breaker rated rufi irin ƙarfin lantarki 800V (RDM1-63 rufi irin ƙarfin lantarki ne 500V), ana amfani da rarraba cibiyar sadarwa na AC 50Hz/AC60Hz, rated aiki ƙarfin lantarki har zuwa 690V, rated halin yanzu har zuwa 1250A don rarraba ikon da kuma kare kewaye da ikon tushen daga. overload, short-circuit da under-voltage lalacewa, kuma za a iya amfani da shi don canja wurin da'ira, motor_x005f fara ba da yawa da kuma overloading, short-kewaye da karkashin-voltage kariya.Ana iya shigar da samfurin a tsaye da a kwance.
Ana amfani da wannan samarwa ga insulation, alamar:

Yanayin aiki na yau da kullun da yanayin shigarwa

3.1 Zazzabi: bai fi +40°C ba, kuma ba ƙasa da -5°C, kuma matsakaicin zafin jiki bai wuce +35°C ba.
3.2 Wurin shigarwa bai wuce 2000m ba.
3.3 Yanayin zafi: bai wuce 50% ba, lokacin da zazzabi ya kasance +40 ° C.Samfurin na iya jure zafi mafi girma a ƙarƙashin ƙananan zafin jiki, misali, lokacin da zazzabi a +20 ° C, samfurin zai iya jure zafi 90%.Ya kamata a kula da ma'auni na musamman wanda ya faru saboda canjin yanayin zafi
3.4 Matsayi na gurɓatawa: 3 Class
3.5 Matsakaicin kusurwa mai karkata zuwa shigarwa: 22.5°
3.6 na'ura mai ba da hanya tsakanin hanyoyin sadarwa da nau'in shigarwa na sarrafawa: II Class;Nau'in shigarwa na babban mai karkatar da kewayawa: Class III;
Yana iya jure jijjiga na yau da kullun kuma yana aiki a tsaye ƙarƙashin yanayin ruwa.

Babban ma'aunin fasaha

4.1 Babban ma'aunin fasaha duba Table 3

4.2 Matsakaicin fitarwa na yanzu ya ƙunshi fitarwar relay na thermal tare da yanayin juzu'in lokaci da sakin nan take (electromagnetic).

Na'ura mai watsewar kewayawa

5.1 Na'urorin haɗi na ciki
5.1.1 Shunt saki
Jadawalin haɗin kai, duba Hoto 1 da Hoto 2.
Ƙimar wutar lantarki na wutar lantarki mai sarrafawa: AC 50/60Hz, 230V, 400V;DC24V, mai watsewar kewayawa na iya aiki da dogaro ƙarƙashin 85% zuwa 110% na ƙimar ƙarfin wutar lantarki mai sarrafawa.

5.12 Ƙarƙashin ƙarfin lantarki
Lokacin da ƙarfin lantarki ya kasance ƙasa da 35% na ƙimar ƙarfin ikon sarrafawa, wannan sakin na iya hana mai watsewar kewayawa daga rufewa.Zane na haɗin kai, duba hoto na 3.
Lokacin da ƙarfin lantarki ya ragu zuwa kewayon 70% zuwa 35% na ƙimar ƙarfin ikon sarrafawa, sakin da ke ƙarƙashin ƙarfin lantarki zai yi rauni.
Lokacin da ƙarfin lantarki yana cikin kewayon 85% zuwa 110% na ƙimar ƙarfin ikon sarrafa wutar lantarki, wannan sakin na iya tabbatar da dosing ɗin da'ira cikin dogaro.
Sanarwa: Mai watsewar da'ira tare da sakin wutar lantarki na iya yin tururuwa da rufewa, kawai ya ba da na'urar kashe wutar lantarki.

5.13 Abokin hulɗa
Mai watsewa yana da lamba saiti biyu, kowane saiti baya buɗewa akan wutar lantarki, ƙarin bayanan tuntuɓar, duba Table 5.

5.14 Ƙararrawa
Ma'aunin ƙarfin ƙarfin aiki mai ƙima, duba Table 5.

5.15 Na'urorin haɗi na musamman na mitar da aka riga aka biya
Shunt saki na Pre-paid Mita rated aiki ƙarfin lantarki ne AC230V 50Hz, Yi aiki a cikin kewayon 65% zuwa 110% Ue, lokacin da Ctrl batu a bude, da'irar breaker za a karya bayan 0.5s zuwa 2s deley.Duba zane:

5.16 Ƙarfin wutar lantarki
Ya kamata na'urar da ke jujjuyawar wutar lantarki ta wuce-wuri ta kasance tana tunkuɗawa a ƙarƙashin waɗannan sharuɗɗa:
a) Lokacin da rated aiki ƙarfin lantarki (lokacin lantarki) Ue kasa da 262V
b) Lokacin da tsaka tsaki na matakai uku da wayoyi hudu ke karye
c) Lokacin da layin tsaka tsaki ya ɓace layin lokaci,

5.2 na'ura mai watsewa na waje
5.21 Tsarin tsarin aikin lantarki duba Table 6

5.22 Ya kamata a shigar da tsarin aiki da hannu bayan hako rami bisa ga zane.
Rotary rike "KASHE" da aka nuna zuwa matsayi a kwance, kiyaye matsayi, da kuma kokarin yin aiki da kayan aiki, juyawa ya kamata ya zama mai sauƙi, kuma mai fashewa ya kamata a bude lokacin da rike a matsayi a kwance;kuma ya kamata a rufe mai karyawa lokacin da rike a tsaye.

Gabaɗaya da Girman Hawa (mm)

5.23 Girman shigarwa na tsaka-tsakin injina na masu watsewar da'ira biyu, duba Table 6 Hoto 6 da Tebura 8.

6.2 Haɗin baya gabaɗaya, duba Hoto 8 da Tebu 10.

6.3 Shigar da haɗin baya buɗaɗɗen girman ramin, duba Table 9

6.4 RDM1 Saka nau'in gabaɗaya da girman buɗaɗɗen ramin shigarwa, duba hoto na 10, siffa 11 da Tebura 11

6.5 RDM1 tsayin da'ira bayan shigar da injin aiki na motop, duba Table 12.